Image | SKU | Name | Description | Manufacturer | |
|
|
10" Rigid Light Tunnel |
Model SRT 10 inch Diameter Rigid Light Tunnel - light tunnel consists of the following parts: dome, flashing, riged light transmitting tube, elbow, prismatic and transparent diffuser and ceiling frame - silver based and light reflective layer used to convey the light inside the building features the highest (98%) reflective coefficient - angle adjustable elbow (element of the installation kit), gives a possibility to adjust the pitch of tube inclination (between 0 and 65 degrees) and helps to avoid construction obstacles during installation - specially prepared flashings guarantee easy and water tight installation - suitable for roofs with pitches between 15 and 60 degrees or for flat roof coverings - SRT light tunnel has a rigid light transmitting tube, made of aluminium and covered on its surface with a silver based and light reflective (in 98%) layer - inside of the tube looks like before mirror - This type of light transmitting tube secures that daylight is conveyed in huge quantities inside the interior - SRT light tunnel can be used in every kind of buildings, but because of its high effectiveness is recommended to be installed in special building where the daylight is transmitted into long distances - SRT light tunnel can be also used at nights thanks to the light installation kit which performs the function of the lamp |
|
|
|
|
14" Rigid Light Tunnel |
Model SRT 14 inch Diameter Rigid Light Tunnel - light tunnel consists of the following parts: dome, flashing, riged light transmitting tube, elbow, prismatic and transparent diffuser and ceiling frame - silver based and light reflective layer used to convey the light inside the building features the highest (98%) reflective coefficient - angle adjustable elbow (element of the installation kit), gives a possibility to adjust the pitch of tube inclination (between 0 and 65 degrees) and helps to avoid construction obstacles during installation - specially prepared flashings guarantee easy and water tight installation - suitable for roofs with pitches between 15 and 60 degrees or for flat roof coverings - SRT light tunnel has a rigid light transmitting tube, made of aluminium and covered on its surface with a silver based and light reflective (in 98%) layer - inside of the tube looks like before mirror - This type of light transmitting tube secures that daylight is conveyed in huge quantities inside the interior - SRT light tunnel can be used in every kind of buildings, but because of its high effectiveness is recommended to be installed in special building where the daylight is transmitted into long distances - SRT light tunnel can be also used at nights thanks to the light installation kit which performs the function of the lamp |
|
|
|
|
10" Rigid Light Tunnel with Integrated Flashing |
Model SRL 10 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Shingles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|
|
|
10" Rigid Light Tunnel with Integrated Flashing |
Model SRH 10 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Metal + Tiles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|
|
|
14" Rigid Light Tunnel with Integrated Flashing |
Model SRL 14 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Shingles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|
|
|
14" Rigid Light Tunnel with Integrated Flashing |
Model SRH 14 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Metal + Tiles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|
|
|
22" Rigid Light Tunnel with Integrated Flashing |
Model SRL 22 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Shingles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|
|
|
22" Rigid Light Tunnel with Integrated Flashing |
Model SRH 22 inch Diameter Right Light Tunnel - Flat Glass with Integrated Flashing - Roof: Metal + Tiles - Rigid Light Transmitting Tube: The light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterized by a high efficiency light reflective factor of over 98% - Roofing Element: Ceiling Frame: This consists of an aluminium frame into which 4mm thick toughened glass is bonded, The light transmitting tube is fitted to the inside profile of the frame - Ceiling Frame: the new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element, The cover is manufactured of high-impact polystyrene in a white opaque colour, Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome - Elbow: The SRK elbow changes the angle of the light transmitting tube in the range of 0-65 degrees - Installation pitch: 15-60 degree |
|
|